Epson EPL-N3000 Service Manual page 312

EPSON EPL-N3000/AcuLaser M4000N
Installation
1. Install the CHUTE 550 LOWER to the 550 FEEDER OPTION with the three
screws (silver, 6mm).
2. Install the 550 FEEDER OPTION to the frame with the six screws (gold, tapping,
8mm).
3. Clamp the harnesses of the HARNESS ASSY FDR MOT and HARNESS ASSY
SIZE FDR2.
4. Connect the connector (P/J801) of the HARNESS ASSY SIZE FDR1 to the
HARNESS ASSY SIZE FDR2.
5. Connect the connector (P/J820) of the MOTOR FEEDER to the HARNESS ASSY
FDR MOT.
6. Connect the connector (P/J855) of the HARNESS ASSY CLSNR 1 to the
HARNESS ASSY CLSNR 2.
After connection, place the connector under the harness and clamp
C A U T I O N
it.
7. Install the COVER RE550 to the frame with the five screws (gold, tapping, 8mm).
Disassembly and Assembly Option 550 Paper Feeder
Revision C
312
Confidential