Epson EPL-N3000 Service Manual page 369

EPSON EPL-N3000/AcuLaser M4000N
Installation
1. Install the PWBA OCT to the SUPPORT OCT RIGHT with the one screw (silver,
6mm).
2. Install the SUPPRT OCT RIGHT mounted with the PWBA OCT to the printer
body with the two screws (gold, tapping, 8mm).
When installing it, insert the PWBA OCT into the two guide
C H E C K
grooves of the printer body.
P O I N T
When installing it, insert the SHUTTER part of the
ACTUATOR FULL STACK into the photo interrupter part on
the PWBA OCT.
3. Connect the harness connectors to the connectors (P/J70, P/J71, P/J72, P/J73, P/
J74, P/J75) of the PWBA OCT.
When connecting the harness connectors, insert the connectors by
C H E C K
securing the PWBA OCT by hand.
P O I N T
4. Clamp the harnesses connected to the S/W REAR COVER.
5. Install the COVER FRONT. (p.366)
6. Install the COVER OCT. (p.364)
7. Install the COVER REAR. (p.362)
Disassembly and Assembly Option OCT
Revision C
369
Confidential