Roll Pinch Fu, Spring Pinch Fu - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.8.13 ROLL PINCH FU, SPRING PINCH FU

Removal
1. Remove the COVER REAR 500. (p.270)
2. Remove the five screws (gold, tapping, 6mm) securing the CHUTE LOW FU to
the COVER REAR 500.
3. Release the hook of the COVER REAR 500, and remove the CHUTE LOW FU
from the COVER REAR 500.
4. Remove the two screws (gold, tapping, 6mm) securing the CHUTE LOW FU.
5. Insert a screwdriver or alike between the ROLL PINCH FU and the CHUTE UP
FU, and remove the ROLL PINCH FU.
6. Remove the SPRING PINCH FU.
Installation
1. Install the SPRING PINCH FU.
2. Install the ROLL PINCH FU.
3. Secure the CHUTE UP FU with the two screws (gold, tapping, 6mm).
4. Install the CHUTE LOW FU to the COVER REAR 500, and secure it at the hook.
5. Secure the CHUTE LOW FU to the COVER REAR 500 with the five screws
(gold, tapping, 6mm).
6. Install the COVER REAR 500. (p.270)
Disassembly and Assembly
ROLL PINCH FU
SPRING PINCH FU
Figure 4- 85. ROLL PINCH FU, SPRING PINCH FU Removal
500 Paper Exit
Revision C
JG3305AA
274
Confidential