Fan Duplex - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.12.6 FAN DUPLEX

Disassembly procedures for these parts are different between EPL-
C H E C K
N3000 and AcuLaser M4000N. For AcuLaser M4000N, see
P O I N T
FAN DUPLEX (AcuLaser M4000N)
Removal
1. Remove the COVER LEFT. (p.353)
2. Remove the COVER TOP. (p.346)
3. Disconnect the connector of the harness from the connector (P/J54) of the PWBA
DUPLEX.
4. Disconnect the harness of the FAN DUPLEX from the hook of the COVER HSG
DUP.
5. Remove the two screws (gold, tapping, 22mm) securing the FAN DUPLEX to the
COVER HSG DUP.
6. Remove the FAN DUPLEX.
Installation
1. Install the FAN DUPLEX to the COVER HSG DUP with the two screws (gold,
tapping, 22mm).
Install the FAN DUPLEX with its label surface outside.
C H E C K
P O I N T
2. Secure the harness of the FAN DUPLEX with the hook of the COVER HSG DUP.
3. Connect the connector (P/J54) of the harness from the connector of the PWBA
DUPLEX.
4. Install the COVER TOP. (p.346)
When installing the COVER TOP, match its positioning holes with
C H E C K
the bosses of the COVER HSG DUP.
P O I N T
Disassembly and Assembly
4.14.11
(p.395).
Option Duplex
5. Install the COVER RIGHT. (p.354)
When installing the COVER RIGHT, match its positioning holes
C H E C K
with the bosses of the COVER HSG DUP.
P O I N T
FAN DUPLEX
COVER HSG DUP
PWBA DUPLEX
Figure 4- 149. FAN DUPLEX Removal
Revision C
LABEL
5)
6)
3)
4)
JG3606AB
Confidential
349