EPSON EPL-N3000/AcuLaser M4000N
4.10.3 LVPS
Disassembly procedures for this part are different between EPL-
C H E C K
N3000 and AcuLaser M4000N. For AcuLaser M4000N, see
P O I N T
LVPS (AcuLaser M4000N)
Removal
1.
Remove the COVER REAR 500. (p.270)
2.
Remove the COVER REAR. (p.167)
3.
Remove the COVER LEFT. (p.169)
4.
Remove the COVER RIGHT. (p.168)
5.
Remove the COVER EXIT 500. (p.261)
6.
Remove the 500 EXIT ASSY. (p.262)
7.
Remove the COVER TOP, CONTROL PANEL. (p.170)
8.
Remove the COVER FRONT. (p.172)
9.
Remove the SHIELD PLATE LVPS.
10. Disconnect the harness connector of the LVPS from the connector (P/J101) of the
PWBA EXIT MOTOR.
11. Disconnect the harness connectors from the connectors (P/J40, P/J41, P/J42, P/
J43, P/J44, P/J45, P/J46, P/J47, P/J48) of the LVPS.
12. Remove the five screws (silver, 6mm) securing the LVPS to the frame.
13. Remove the LVPS.
Disassembly and Assembly
4.14.7
(p.390).
Figure 4- 94. LVPS Removal
Electrical
Revision C
PWBA EXIT MOTOR
LVPS
13)
12)
P/J 42 4140
11)
P/J
43
44
45
LVPS
46
47
48
JG3177AA
Confidential
287