EPSON EPL-N3000/AcuLaser M4000N
4.8.15 GATE ASSY EXIT
Removal
1.
Remove the COVER REAR 500. (p.270)
2.
Remove the COVER REAR. (p.167)
3.
Remove the COVER LEFT. (p.169)
4.
Remove the COVER RIGHT. (p.168)
5.
Remove the COVER EXIT 500. (p.261)
6.
Remove the 500 EXIT ASSY. (p.262)
7.
Remove the CHUTE LOW EXIT.
8.
Remove the SPRING GATE OCT.
9.
Remove the GATE OCT EXIT while bowing it.
Installation
1.
Install the GATE OCT EXIT.
2.
Install the SPRING GATE OCT.
3.
Install the CHUTE LOW EXIT.
(p.263)
4.
Install the 500 EXIT ASSY. (p.262)
5.
Install the COVER EXIT 500. (p.261)
6.
Install the COVER RIGHT. (p.168)
7.
Install the COVER LEFT. (p.169)
8.
Install the COVER REAR. (p.167)
When installing the COVER REAR, distinguish the two different
C H E C K
types of screws and use them at the correct positions.
P O I N T
9.
Install the COVER REAR 500. (p.270)
Disassembly and Assembly
(p.263)
SPRING GATE OCT
Figure 4- 87. GATE ASSY EXIT Removal
500 Paper Exit
Revision C
GATE OCT EXIT
JG3307AA
276
Confidential