Epson EPL-N3000 Service Manual page 187

EPSON EPL-N3000/AcuLaser M4000N
Installation
1. Insert the SHAFT PB into the PLATE ASSY BTM, and install the GEAR BTM
DMP ONEWAY, GEAR PB L and GEAR BTM LOCK ONEWAY.
2. Move away the GEAR PB L, and install the assembled PLATE ASSY BTM to the
HOUSING TOP 150.
When installing the PLATE ASSY BTM, securely engage the
C A U T I O N
two SPRINGs BTM UP 150 with the bosses on the rear side of
the PLATE ASSY BTM. (NOTE 1)
Insert the two claws at the front end of the PLATE ASSY BTM
into the hooks of the HOUSING TOP 150 (NOTE 2).
3. Install the GEAR PB R to the SHAFT PB, and secure it with the hook.
Engage the hooks of the GEAR PB R with the grooves in the
C A U T I O N
SHAFT PB properly.
Install the GEAR PB R with the PLATE ASSY BTM in the
raised position. An inclined PLATE ASSY BTM can cause a
paper skew or paper jam. After installation, make certain that
the PLATE ASSY BTM is not inclined.
4. Hold down the hook of the HOUSING TOP 150, and install the GUIDE ASSY SD
R150 to the HOUSING TOP 150.
After completion of installation, make sure that the three claws of
C H E C K
the GUIDE ASSY SD R150 are inserted in the grooves of the
P O I N T
HOUSING TOP150 (NOTE 3).
5. Hold down the hook of the HOUSING TOP 150, and install the GUIDE ASSY SD
L150 to the HOUSING TOP 150.
After completion of installation, make sure that the three claws of
C H E C K
the GUIDE ASSY SD L150 are inserted in the grooves of the
P O I N T
HOUSING TOP150.
Disassembly and Assembly
6. Push down the PLATE ASSY BTM to have it locked.
7. Install the GEAR PINION to the HOUSING TOP 150.
Install the GEAR PINION with the GUIDE ASSY SD R150 and
C A U T I O N
GUIDE ASSY SD L150 opened to their outermost positions.
Dislocation of the GUIDE ASSY SD R150 and/or GUIDE ASSY SD
L150 can dislocate the Side Regi.
8. Install the COVER CST to the cassette body.
150 Paper Cassette
Revision C
187
Confidential