Epson EPL-N3000 Service Manual page 361

EPSON EPL-N3000/AcuLaser M4000N
Installation
During installation, do the work carefully not to drop the Option
C A U T I O N
OCT.
1. Insert the two hooks at the bottom of the COVER OCT into holes of the printer
body, place the Option OCT on the printer body, and connect it to the connector
(P/J3070) of the HARNESS ASSY OCT2 of the printer body.
When installing the Option OCT, securely insert the two hooks at
C H E C K
its bottom into the printer body.
P O I N T
2. Tighten the two SCREWs THUMB to secure the Option OCT to the printer body.
When installing the Option OCT, fix it tightly by securely
C H E C K
tightening the SCREWs THUMB.
P O I N T
3. Disengage the hinges at both ends of the FLAPPER L from the COVER OCT.
Disassembly and Assembly Option OCT
Revision C
361
Confidential