Engine Status Sheet (Aculaser M4000N Only) - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

7.4.3 Engine Status Sheet (AcuLaser M4000N only)

Table 7-7. Engine Status Sheet
Location Item
1 Total Counts Total Pages
Jam Counts
2 Toner Cartridge Remain
Total Dots
Changes
Capacity
Consumed
Pages
3 Fuser Unit Remain
Pages
Changes
4 Maintenance Remain
Unit
Pages
Changes
5 LC2 Feed Consumed
Roller
Sheets
Changes
Appendix
Units Explanation
pages Total number of printed pages
times Number of paper jam occurrences
% Remaining amount of toner
--- Total number of dots
times Number of detections of new toner
cartridges
pages Remaining toner capacity
--- Amount of toner consumption
pages Total number of impressions printed
using the cartridge.
% Remaining amount of Fuser Unit.
pages Total number of impressions printed
using the Fuser Unit.
times Number of replacements of new Fuser
Unit.
% The current usage level of the
maintenance unit.
pages Total number of impressions printed
since the unit is installed.
times Number of replacements of
the unit.
% Consumption percentage of the paper
feed roller LC2.
Sheets Total number of pages printed
since the roller is installed.
Times Number of replacements of
the roller.
Location Item
6 LC3 Feed
Roller
7 Printer Adjust
Menu
8 Power On
9 Sleep
10 MCU
11 Error Log
Information Sheet
Table 7-7. Engine Status Sheet
Units Explanation
Consumed % Consumption percentage of the paper
feed roller LC2.
Sheets Sheets Total number of pages printed
since the roller is installed.
Changes Times Number of replacements of
the roller.
Normal Step The paper type to be notified to the
engine when printing with PaperType =
Normal.
Thick Step The printing speed to be notified to the
engine when printing with PaperType =
Thick.
Extra Thick Step The printing speed to be notified to the
engine when printing with PaperType =
Extra Thick.
Feed Offset mm The offset values specified using the
printer adjustment function.
Scan Offset mm
Feed Offset 2 mm
Scan Offset 2 mm
Times Number of power-on times
Times Number of times returned from the
power save mode.
--- Engine controller firmwareversion (A
10-digit number).
The following information for each error is printed; panel
messages, EJL status code, the number of printed pages, jam code,
paper size, paper type, date and time. Up to 20 errors are printed in
reverse chronologic order. The target errors are paper jam errors
and service request errors that occurred after (Ready) status.
JAM : Jam status code is expressed in hexadecimal eight-digit
character string. Table 7-8 "Paper Jam Code," (p,435)
explanation on how to read the code.
Size : Paper size indicated on the control panel
Type : Paper type name used to be identified by the engine.
Date/Time : Paper jam occurrence date and time
Revision C
for
434
Confidential