Cover Left Plate - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.11.3 COVER LEFT PLATE

Removal
1. Remove the two screws (gold, tapping, 8mm) securing the EARTH PLATE to the
frame.
2. Remove the EARTH PLATE.
3. Slightly lift the COVER LEFT PLATE above the boss of the FRAME CVR L500
in the direction of the arrow to disengage it from the boss.
4. Move the COVER LEFT PLATE in the direction of the arrow to disengage the
four hooks from the FRAME CVR L550, and remove it from the Feeder body.
Installation
1. Move the COVER LEFT PLATE in the direction opposite to the arrow to engage
the four hooks with the FRAME CVR L550, and install it to the Feeder body.
2. Fit the COVER LEFT PLATE to the boss of the FRAME CVR L550.
3. Install the EARTH PLATE to the frame with the two screws (gold, tapping, 8mm).
When installing the EARTH PLATE, insert its front end to under
C A U T I O N
the COVER LEFT PLATE.
Disassembly and Assembly
EARTH PLATE
1)
Figure 4- 110. COVER LEFT PLATE Removal
Option 550 Paper Feeder
Revision C
COVER LEFT PLATE
3)
BOSS
FRAME CVR L550
JG3503AA
Confidential
4)
305