EPSON EPL-N3000/AcuLaser M4000N
Installation
1.
Secure the PWBA DUPLEX to the COVER HSG DUP with the two screws (gold,
tapping, 8mm x1, gold, 6mm x1).
Install the PWBA DUPLEX to the COVER HSG DUP in the
C H E C K
orientation shown in the figure.
P O I N T
In the place of the Screw (A) shown in the figure, tighten the
screw of gold, 6mm.
2.
Connect the harness connectors to the connectors (P/J50, P/J51, P/J52, P/J53, P/
J54) of the PWBA DUPLEX.
3.
Install the COVER TOP. (p.346)
When installing the COVER TOP, match its positioning holes with
C H E C K
the bosses of the COVER HSG DUP.
P O I N T
4.
Install the COVER RIGHT. (p.354)
When installing the COVER RIGHT, match its positioning holes
C H E C K
with the bosses of the COVER HSG DUP.
P O I N T
5.
Install the COVER LEFT. (p.353)
When installing the COVER LEFT, match its positioning holes
C H E C K
with the bosses of the COVER HSG DUP.
P O I N T
Disassembly and Assembly
(Refer to Figure 4- 148)
(Refer to Figure 4- 148)
Option Duplex
Revision C
348
Confidential