EPSON EPL-N3000/AcuLaser M4000N
5.2 Adjustment
5.2.1 Reset Life Counter
PURPOSE
This menu is provided for resetting life counters of parts or components stored in the
printer. Whenever any of those parts or components is replaced, use this menu to reset
the corresponding life counter to 0 (zero).
PROCEDURE
Reset Menu
1.
Reassemble the printer.
2.
Turn the printer on.
3.
When the printer started up, click the [
4.
Select "Reset Menu" using the [
] or [
5.
Select "Reset XXXXX Counter" using the [
button. The life counter of "XXXXX" will be reset to "0".
Parts
Fuser Unit
Maintenance Unit
Adjustment
] button.
] button, then click the [OK] button.
] or [
] button, then click the [OK]
Menu
Reset Fuser Counter
Reset Maintenance Counter
Maintenance Menu
1.
Reassemble the printer.
2.
While holding down the [
3.
When "MAINTENANCE MODE" is displayed on the LCD, release the buttons.
4.
Select "Maintenance Menu" using the [
5.
Select "Reset XXXXX Counter" using the [
button. The life counter of "XXXXX" will be reset to "0".
Parts
KIT ROLL ASSY FEED (Cassette 2)
KIT ROLL ASSY FEED (Cassette 3)
Adjustment
], [
], [
], and [
] simultaneously, turn the printer on.
] or [
] button, then click the [OK] button.
] or [
] button, then click the [OK]
Menu
Reset LC2 Counter
Reset LC3 Counter
Revision C
398
Confidential