EPSON EPL-N3000/AcuLaser M4000N
4.11.27 SPRING EARTH TOP
Removal
1.
Remove the one screw (silver, 6mm) securing the SPRING EARTH TOP to the
FRAME TOP ASSY.
2.
Remove the SPRING EARTH TOP.
Installation
1.
Insert the front end of the SPRING EARTH TOP into the hole of the FRAME
TOP ASSY, and secure it with the one screw (silver, 6mm).
The front end of the SPRING EARTH TOP must not ride on
C H E C K
the FRAME TOP ASSY.
P O I N T
After installation, push down the head of the SPRING EARTH
TOP and make sure that it goes down.
Disassembly and Assembly
NOTE
Figure 4- 142. SPRING EARTH TOP Removal
Option 550 Paper Feeder
Revision C
1)
2)
341
Confidential