Pwba Feeder 550 - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.11.8 PWBA FEEDER 550

Removal
1. Remove the COVER RIGHT PLATE. (p.304)
2. Disconnect the harness from the connectors (P/J80, P/J81, P/J82, P/J83, P/J84 and
P/J85) of the PWBA FEEDER 550.
3. Remove the two screws (gold, tapping, 8mm) securing the PWBA FEEDER 550
to the frame.
4. Remove the PWBA FEEDER 550.
Installation
1. Install the PWBA FEEDER 550 to the frame with the two screws (gold, tapping,
8mm).
One of the screws securing the PWBA FEEDER 550 is also
C A U T I O N
securing the FRAME TOP ASSY.
When installing it, match the positioning holes of the PWBA
FEEDER 550 with the bosses of the FRAME CVR R550.
2. Connect the harness connectors to the connectors (P/J80, P/J81, P/J82, P/J83, P/
J84, P/J85) of the PWBA FEEDER 550.
3. Install the COVER RIGHT PLATE. (p.304)
Disassembly and Assembly
Figure 4- 115. PWBA FEEDER 550 Removal
Option 550 Paper Feeder
P/J82
PWBA FEEDER 550
4)
3)
Revision C
80
85
81 84 83
BOSS
JG3509AA
310
Confidential