Epson EPL-N3000 Service Manual page 202

EPSON EPL-N3000/AcuLaser M4000N
Installation
1. Insert the SHAFT PB into the PLATE ASSY BTM, and install the GEAR BTM
DMP ONEWAY, GEAR PB L and GEAR BTM LOCK ONEWAY.
2. Move away the GEAR PB L, and install the assembled PLATE ASSY BTM to the
HOUSING TOP 550.
When installing the PLATE ASSY BTM, securely engage the
C A U T I O N
two SPRINGs BTM UP 550 with the bosses on the rear side of
the PLATE ASSY BTM. (NOTE 1) (
Insert the two claws at the front end of the PLATE ASSY BTM
into the hooks of the HOUSING TOP 550. (NOTE 2) (
3. Insert the link lever of the GUIDE INDICATOR 1 into the hole of the PLATE ASSY BTM.
4. Install the GEAR PB R to the SHAFT PB, and secure it with the hook.
Engage the hooks of the GEAR PB R with the grooves in the
C A U T I O N
SHAFT PB properly.
Install the GEAR PB R with the PLATE ASSY BTM in the
raised position. An inclined PLATE ASSY BTM can cause a
paper skew or paper jam. After installation, make certain that
the PLATE ASSY BTM is not inclined.
5. Hold down the hook of the HOUSING TOP 550, and install the GUIDE ASSY SD
R550 to the HOUSING TOP 550.
After completion of installation, make sure that the three claws of
C H E C K
the GUIDE ASSY SD R550 are inserted in the grooves of the
P O I N T
HOUSING TOP 550. (NOTE 3) (
6. Hold down the hook of the HOUSING TOP 550, and install the GUIDE ASSY SD
L550 to the HOUSING TOP 550.
After completion of installation, make sure that the three claws of
C H E C K
the GUIDE ASSY SD L550 are inserted in the grooves of the
P O I N T
HOUSING TOP 550. (NOTE 3) (
7. Push down the PLATE ASSY BTM to have it locked.
Disassembly and Assembly
)
p.201
)
p.201
)
p.200
)
p.200
550 Paper Cassette
8. Install the GEAR PINION to the HOUSING TOP 550.
Install the GEAR PINION with the GUIDE ASSY SD R550 and
C A U T I O N
GUIDE ASSY SD L550 opened to their outermost positions.
Dislocation of the GUIDE ASSY SD R550 and/or GUIDE ASSY SD
L550 can dislocate the Side Regi.
9. Install the COVER CST to the cassette body.
After completion of assembling, move the PLATE ASSY BTM up/
C H E C K
down, and make sure that the LOW IND FRONT moves up/down
P O I N T
synchronously.
Figure 4- 32. PLATE ASSY BTM Installation
Revision C
GUIDE INDICATOR 1
PLATE ASSY BTM
JG3190AA
202
Confidential