EPSON EPL-N3000/AcuLaser M4000N
4.7.10 CHUTE TRANSFR
Removal
1.
Remove the COVER REAR 500. (p.270)
2.
Remove the COVER REAR. (p.167)
3.
Remove the FUSER ASSY. (p.253)
4.
Remove the BTR ASSY. (p.254)
5.
Remove the FAN MAIN. (p.293)
6.
Release the hook of the CHUTE TRANSFER.
7.
Shift the CHUTE TRANSFER in the direction of the arrow and remove it from the
frame.
Installation
1.
Move the CHUTE TRANSFER in the direction opposite to the arrow, install the
CHUTE TRANSFER to the frame, and secure it with the hook.
In the hole on the left side of the CHUTE TRANSFER, a screw need
C A U T I O N
not be tightened.
2.
Install the FAN MAIN. (p.293)
3.
Install the BTR ASSY. (p.254)
4.
Install the FUSER ASSY. (p.253)
5.
Install the COVER REAR. (p.167)
Pay attention to the difference between the two types of screws and
C A U T I O N
use them at their correct positions respectively.
6.
Install the COVER REAR 500. (p.270)
Disassembly and Assembly
CHUTE TRANSFER
NOT FIX THE SCREW
IN THIS HOLE
Figure 4- 68. CHUTE TRANSFR Removal
Xero
7)
6)
HOOK
JG3015EA
Confidential
Revision C
255