Driving Force Trasmission Route; Main Unit - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

2.3 Driving Force Trasmission Route

2.3.1 Main Unit

2.3.1.1 Main Motor
The driving force for the main unit is generated by the MAIN MOTOR. The force is
transmitted via the gears in the GEAR ASSY HOUSING and the GEAR ASSY
PLATE to the printer components that require mechanical driving force.
MOTOR ASSY EXIT
GEAR 16/49
GEAR 25-1
GEAR 21
ROLL FU
500 Paper Exit & Option Face Up Tray
Figure 2-6. Driving Force of Main Motor
Operating Principles
GEAR 25-2
GEAR 21
ROLL EXIT
Driving Force Trasmission Route
As shown in Figure. 2-9, the driving force is distributed via the gears in the GEAR
ASSY HOUSING and the GEAR ASSY PLATE to the Imaging Cartridge, 150
FEEDER ASSY, 250/550 FEEDER ASSY and FUSER ASSY.
The driving force transmitted to the 150 FEEDER ASSY drives the ROLL REGI
METAL and ROLL REGI RUBBER, and the ROLL ASSY NUDGER and ROLL
ASSY FEED. The driving force transmitted to the 550 FEEDER ASSY drives the
ROLL ASSY NUDGER and ROLL ASSY FEED. The driving force transmitted to the
EP Cartridge drives the Drum and is transmitted via the Drum Gear to the BTR ASSY.
The driving force transmitted to the FUSER ASSY drives the Heat Roll.
2.3.1.2 Motor Assy Exit
The driving force for the base engine is generated by the MOTOR ASSY EXIT. The
force is transmitted via the each gears to the printer components that require
mechanical driving force.
Figure 2-7. Driving Force of Motor Assy Exit
Revision C
38
Confidential