Epson EPL-N3000 Service Manual page 186

EPSON EPL-N3000/AcuLaser M4000N
At the following steps, the GEAR PB L, GEAR BTM DMP
C H E C K
ONEWAY and GEAR BTM LOCK ONEWAY are released from
P O I N T
their installed positions. Take care not to lose any of the gears.
7. Release the hook of the GEAR PB R, and remove the GEAR PB R from the
SHAFT PB.
The GEAR PB R is difficult to remove. Remove it using care not to
C A U T I O N
damage it.
8. Bend the HOUSING BASE 150 in the direction of the arrow, move the GEAR PB
L away, and remove the PLATE ASSY BTM, SHAFT PB, GEAR PB L, GEAR
BTM DMP ONEWAY and GEAR BTM LOCK ONEWAY together from the
HOUSING TOP 150.
9. Pull the SHAFT PB out of the PLATE ASSY BTM, and remove the GEAR PB L,
GEAR BTM DMP ONEWAY and GEAR BTM LOCK ONEWAY.
Disassembly and Assembly
GEAR PB L
GEAR BTM DMP ONEWAY
9)
Figure 4- 19. PLATE ASSY BTM Removal
150 Paper Cassette
SHAFT PB
PLATE ASSY BTM
GEAR BTM LOCK ONEWAY
(NOTE 2)
8-2)
8-1)
GEAR PB R
Revision C
9)
(NOTE 1)
SPRING
BTM UP150
7-1)
7-2)
JG3013AB
186
Confidential