Epson EPL-N3000 Service Manual page 373

EPSON EPL-N3000/AcuLaser M4000N
Installation
1. Install the SENSOR OCT to the HOUSING OCT, and secure it with the hooks.
2. Move the ACTUATOR OCT in the direction opposite to the arrow to install it to
the hooks.
3. Install the SPRING ACTUATOR.
Engage the SPRING ACTUATOR with the ACTUATOR OCT as
C A U T I O N
shown in the figure.
4. Connect the connector (P/J730) of the HARNESS ASSY OCT SNR to the
SENSOR OCT.
5. Secure the HARNESS ASSY OCT SNR with the hook.
6. Install the COVER FRONT. (p.366)
7. Install the COVER OCT. (p.364)
8. Install the COVER REAR. (p.362)
Disassembly and Assembly
SPRING ACTUATOR
Figure 4- 169. SENSOR OCT Installation
Option OCT
Revision C
ACTUATOR OCT
JG3813AA
373
Confidential