Special Menu - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

7.3.2 Special Menu

The following special adjustment menu is provided.
The underlined values are default values.
SUPPORT MENU
Setting item Settings
HDD Format Executable Formatting the hard disk drive
type
PS3 HDD Init Executable Erase only the fonts installed from the
type Adobe PostScript 3 (PS3).
HDD Data All Executable Delete data by filling all sectors with 0.
Delete type
Sleep Mode Enable, Sets the Sleep Mode behavior.
Disenable
LCD Backlight Auto, On, Off Selects the control on the backlight of the
LCD panel.
PRINTER ADJUST MENU
Setting item Settings
Normal 0~1 Sets the paper type and printing speed
to be notified to the engine when
printing with PaperType = Normal.
Thick 0~1 Sets the printing speed to be notified to
the engine when printing with
PaperType = Thick.
Extra Thick 0~1 Sets the printing speed to be notified to
the engine when printing with
PaperType = Extra Thick.
Feed Offset -3.5 ~ 0.0 ~ 3.5 Sets the physical offset on the one side
of the paper.The unit is (mm). The value
Scan Offset -3.5 ~ 0.0 ~ 3.5
can be changed in increments of 0.5mm.
Feed Offset 1 -3.5 ~ 0.0 ~ 3.5 Sets the physical offset on the two-front
of the paper.The unit is (mm). The value
Scan Offset 2 -3.5 ~ 0.0 ~ 3.5
can be changed in increments of 0.5mm.
Appendix
EPL- AcuLaser
Explanation
N3000 M4000N
O
O
X
O
O
EPL- AcuLaser
Explanation
N3000 M4000N
X
X
X
O
O
O
O
Control Panel Special Operations
MAINTENANCE MENU
Setting item Settings
Engine Status Executable type Starts printing the Engine Status
Sheet
Print Log Report Executable type Starts printing the Print Log Sheet.
Reset LC2 Executable type Resets the counter for the used
Counter
O
Reset LC3 Executable type
Counter
O
Clear Error Log Executable type Clears the Error Log List stored to
O
TOP MP -4.0 ~ 0.0 ~ 4.0 Sets the margin on top direction of
TOP LC1 -4.0 ~ 0.0 ~ 4.0
O
TOP LC2 -4.0 ~ 0.0 ~ 4.0
O TOP LC3 -4.0 ~ 0.0 ~ 4.0
TOP Duplex -4.0 ~ 0.0 ~ 4.0
TOP Thick -4.0 ~ 0.0 ~ 4.0
Side MP -4.0 ~ 0.0 ~ 4.0 Sets the margin on side direction of
Side LC1 -4.0 ~ 0.0 ~ 4.0
Side LC2 -4.0 ~ 0.0 ~ 4.0
O
Side LC3 -4.0 ~ 0.0 ~ 4.0
Side Duplex -4.0 ~ 0.0 ~ 4.0
O
O
O
O
O
O
EPL-
Explanation
N3000
X
Sheet.
X
X
amount of the paper source feed
roller.
X
X
display on the Engine Status Sheet.
O
the paper in each paper feeder .The
O
unit is (mm).
The value can be changed in
O
increments of 0.5mm.
O
O
O
O
the paper in each paper feeder.
O
The unit is (mm). The value can be
O
changed in increments of 0.5mm.
O
O
Confidential
Revision C
AcuLaser
M4000N
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
429