Epson EPL-N3000 Service Manual page 402

EPSON EPL-N3000/AcuLaser M4000N
MAIN CONTROLLER FIRMWARE UPDATE
Procedure
1 Check the current firmware version Print a status sheet, and check the current firmware version.
2 Connect the printer to the computer
3 Prepare the firmware data file
4 Start up the printer
5
Prepare to transmit the file
6 Transmit the data
Adjustment
Method 1
(RCC)
Connect the printer to the computer with a USB cable.
Confirm that "Ready" is displayed on the LCD panel.
Turn the computer on, copy the firmware data file (extension: RCC), and
save it onto the computer.
---
Run the Firmware Update Tool.
Select the port and firmware data file on the Firmware Update Tool
window.
Click [Send] on the Firmware Update Tool window.
Print a status sheet, and check the current firmware version.
Turn off both the printer and the computer, and connect them with a USB
cable.
Before connecting the USB cable, make sure to disconnect other
C A U T I O N
interface cables from the product.
Turn the computer on, copy the firmware data file (extension: CRB), and
save it onto the computer.
Hold down [Start/Stop] + [Cancel Job] + [
printer will start up in "Program ROM update" mode.
Run the Firmware Update Tool.
Select the port and firmware data file on the Firmware Update Tool
window.
Click [Send] on the Firmware Update Tool window.
Firmware Update
Revision C
Method 2
(CRB)
] and turn the printer on. The
402
Confidential