Epson EPL-N3000 Service Manual page 331

EPSON EPL-N3000/AcuLaser M4000N
At the following steps, the GEAR PB L, GEAR BTM DMP
C A U T I O N
ONEWAY and GEAR BTM LOCK ONEWAY are released from
their installed positions. Take care not to lose any of the gears.
7. Release the hook of the GEAR PB R, and remove the GEAR PB R from the
SHAFT PB.
The GEAR PBR is difficult to remove. When removing it, be
C A U T I O N
careful not to damage it.
8. Bend the HOUSING BASE 550 in the direction of the arrow, move the GEAR PB
L away, and remove the PLATE ASSY BTM, SHAFT PB, GEAR PB L, GEAR
BTM DMP ONEWAY and GEAR BTM LOCK ONEWAY together from the
HOUSING TOP 550.
9. Pull the SHAFT PB out of the PLATE ASSY BTM, and remove the GEAR PB L,
GEAR BTM DMP ONEWAY and GEAR BTM LOCK ONEWAY.
Disassembly and Assembly
GEAR PB L
GEAR BTM DMP ONEWAY
11)
Figure 4- 133. PLATE ASSY BTM Removal
Option 550 Paper Feeder
11)
SHAFT PB
PLATE ASSY BTM
GEAR BTM LOCK ONEWAY
(NOTE 1)
10-2)
(NOTE 2)
10-1)
Revision C
11)
SPRING BTM UP 550
9-1)
9-2)
GEAR PB R
JG3525AB
331
Confidential