Lvps (Aculaser M4000N) - Epson EPL-N3000 Service Manual

EPSON EPL-N3000/AcuLaser M4000N

4.14.7 LVPS (AcuLaser M4000N)

Removal
1. Remove the COVER REAR 500. (p.270)
2. Remove the COVER REAR (AcuLaser M4000N). (p.379)
3. Remove the COVER LEFT. (p.169)
4. Remove the COVER RIGHT. (p.168)
5. Remove the COVER EXIT 500. (p.261)
6. Remove the 500 EXIT ASSY. (p.262)
7. Remove the COVER TOP, CONTROL PANEL (AcuLaser M4000N). (p.380)
8. Remove the COVER FRONT. (p.172)
9. Remove the SHIELD PLATE LVPS.
10. Disconnect the harness connector of the LVPS from the connector (P/J101) of the
PWBA EXIT MOTOR.
11. Disconnect the harness connectors from the connectors (P/J40, P/J41, P/J42, P/
J43, P/J44, P/J45, P/J46, P/J47, P/J48) of the LVPS.
12. Remove the five screws (silver, 6mm) securing the LVPS to the frame.
13. Remove the LVPS.
Disassembly and Assembly AcuLaser M4000N Unique Disassembly Procedures
PWBA EXIT MOTOR
13)
P/J42
P/J43
P/J41
P/J44
P/J45
Figure 4- 180. LVPS Removal
Revision C
LVPS
12)
11)
P/J46 P/J40
LVPS
P/J47
P/J48
J23177EA
390
Confidential