Installing The Roll Paper; Installing The Ribbon; Inserting Slip Paper - Epson TM-H6000III User Manual

Installing the Roll Paper

See illustration B.
Note:
Do not use paper rolls that have the paper glued or taped to the core because they might
cause a paper jam.
To prevent paper jams, make sure that nothing obstructs paper coming out of the paper
exit, and do not pull the paper out of the printer.

Installing the Ribbon

See illustration C.
Use genuine Epson ERC-32 ribbon cassettes.
1. Turn on the printer. Turn the knob on the ribbon cassette. Open the front
cover of the printer, and insert the new ribbon.
2. Turn the knob 2 or 3 times, and check the ribbon position.

Inserting Slip Paper

See illustration D.
Note:
Be sure that the slips are flat, without curls, folds, or wrinkles.
MICR Reading/Image Scanning/Printing
(Factory installed options)
With the scanning function, when a check is inserted into the printer, the check
image is digitized and stored, which saves check processing time and cost. Epson
recommends the following sequence for single-pass processing. The single pass
eliminates the need to turn the check paper over.
1. MICR reading
2. Pre-scanning
3. Endorsement printing (printing on back)
4. Printing on front
5. VOID printing
6. Scanning
Notes on Using the Slip Image Scanner
❏
Be sure to include the pre-scanning step because it can minimize as much as
possible problems of decreasing image data quality caused by environmental
temperature, wear of scanner parts, great variation in color shading of the
background of a check, and input voltage fluctuation.
❏
The quality of image scanning on the front of a check may be reduced by a
large variation in density of an ink ribbon cassette.
TM-H6000III User's Manual 5
English