EPSON EPL-N1600
4.3.35 Roll-Pinch
1. Remove the Cover Side,E. (Section 4.2.1)
2. Remove the Control Assembly Panel (E). (Section 4.2.3)
3. Remove the Cover Assembly MBF.E.(Section 4.2.4)
4. Remove the Tray Assembly MBF.E.(Section 4.2.5)
5. Remove the Cover Assembly,E. (Section 4.3)
6. Remove the Roll Assembly Exit Out. (Section 4.3.27)
7. Remove the Fuser Assembly. (Section 4.3.31)
8. Remove the Roll Assembly Exit. (Section 4.3.34)
9. Pry the Roll-Pinch off of the Chute-Exit Heat Roll.
Rev. A
Chapter 4
Disassembly and Assembly
Figure 4-41. "Roll-Pinch" Removal
4-144