Chute Inlet Registration - Epson EPL-N1600 Service Manual

EPSON EPL-N1600

4.3.5 Chute Inlet Registration

1. Remove the Cover Side,E. (Section 4.2.1)
2. Remove the Control Assembly Panel (E). (Section 4.2.3)
3. Remove the Cover Assembly MBF.E.(Section 4.2.4)
4. Remove the Tray Assembly MBF.E.(Section 4.2.5)
5. Remove the Cover Assembly,E. (Section 4.3)
6. Remove the ROS Assembly. (Section 4.3.37)
7. Remove the Latch R and L.(Section 4.3.50)
8. Remove the Shaft Latch. (Section 4.3.51)
9. Remove the six screws that secure the Angle to the Printer Frame.
10. Remove the Angle, along with the attached Chute Inlet Registration,
from the Printer Frame.
11. Remove the two screws that secure the Chute Inlet Registration to
the Angle and separate the Chute from the Angle.
12. Remove the screw that secures the Plate Earth Chute to the Angle
and separate the Plate Earth Chute from the Angle.
Rev. A
Chapter 4
Figure 4-11. "Chute Inlet Registration" Removal
Disassembly and Assembly
4-114