Service Manual
Lower Chute Assembly Removal
3.2.4.3
1. Open the front cover.
2. Remove the REGI roll assembly. (Refer to Section 3.2.4.2.)
3. Remove 4 CBB screws (M3 x 8) securing the lower chute assembly, and remove it.
Figure 3-25. Removing the Lower Chute Assembly
3.2.4.4 BTR Assembly Removal
Never touch the surface of the BTR.
1. Open the front cover.
2. Remove the BTRassembly.
Figure 3-26. Removin the BTR Assembly
Rev. A
Disassembly and Assembly
3-17