Raster Image Processor (Rip) Tcp/Ip Assignment - Kodak NOVAJET 750 Training Manual

NJ750 Training Guide

4. RASTER IMAGE PROCESSOR (RIP) TCP/IP ASSIGNMENT

1. The last step of the networking setup is to assign an IP address in the RIP software
(this TCP/IP address is the same address assigned to the SEH Intercon print server).
The location of the 'device' or 'TCP/IP setup' is normally located under the RIP software
'setup' drop-down menu or under the 'Printer Configuration' folder, depending on the RIP
used.
32