NEC Univerge SV8100 Features And Specifications Manual page 604

Issue 7.0
Required Component(s)
None
Related Features
Automatic Route Selection
Central Office Calls, Placing
T1 Trunking (with ANI/DNIS Compatibility)
ISDN Compatibility
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-12-56 Service Code Setup (for Service
Access) – E911 Alarm Shut Off
14-05-01 Trunk Group – Trunk Group
Number
2 - 576
Description/Comments
Select the Service Code (normally
786) that an extension user can
dial to shut off the E911 Alarm
Ring.
Assign the outbound trunks you
want to use for E911 service to the
same Trunk Group.
UNIVERGE SV8100
Assigned Data
1
MLT
(default = 786)
Trunk Group Number:
0~100 Priority Number:
1~200 (default = Trunk
Group 1, with priority in
ascending order.)
E911 Compatibility
Level
2 3

