Cover And Intake Filter Assembly; Adjusting Low Speed Switch - Pontiac Grand Prix Service Manual

ACCESSORIES
15-7
SEALING RIDGE
(DO NOT S C R A T ~ H OR DENT)
FILTER PLATE FILTER
CAUTION:
- [ -
FACTORY ADJUSTEQ
POINT ADJUSTING LOW SPEED
SCREW
SWITCH
Fig. 15-6 Adjusting Low Speed Switch
Fig. 15-5 Cover and Intake Filter Assembly
REGULATOR
-
DISASSEMBLE (Fig. 15-4)
b. The screw in the bearing support assembly.
NOTE: Do not tamper with the following screws (Fig.
The screw on top ojthe rotenoid coil.
15-6).
a. Vacuum restriction screw in regulator housing.
These screws are pre-adjusted at the factory.
ACTUATOR PIN
GOVERNOR SPRING
BEARING SLIPPORT
Fig. 15-7 Bearing Support
-
Removal