Pontiac Grand Prix Service Manual page 438

7C-2 1969
PONTIAC SERVICE MANUAL
EXTENSION HOUSING SEAL & BUSHING
Refer to Section 4B.
TRANSMISSION SIDE COVER
REMOVE
The following procedure may be performed with the
transmission in or out of the car:
1. Disconnect linkage from shift levers on transmis-
sion, leaving it in neutral.
2. Loosen side cover bolts and allow transmission to
drain.
3. Remove side cover from case.
4. Remove outer shifter levers.
5. Remove shift forks from shifter shaft assemblies.
Remove all three shifter shaft assemblies. Remove
reverse shifter shaft detent ball and spring (Fig. 7C-3).
6. Remove detent cam spring and pivot retainer
C-ring. Mark to identify both detent cams and remove.
7. Inspect O-ring seals on shifter shafts. Replace any
damaged parts.
REPLACE
1.
Install shifter shaft O-rings if removed.
A LUBRICATE WITH
CHASSIS LUBRICANT
$
30 LB. FT.
50 LB. FT.
20 LB. FT.
TORQUE SYMBOL IS
ADJACENT TO CALLOUT FOR
MEMBER TO BE TORQUED.
POSITION)
HlFT LEVER SEAL
(.250/.24gV DIA.)
CONTROL ROD
CIRCLE Y
(3rd 8 4Un)
(1It h 2nd)
Fig. 7C-1 Firebird Shift Control