Tempest And Grand Prix Battery,Cable Routing; Fuse Block And Bulkhead Connector; Engine Wire Harness - Pontiac Grand Prix Service Manual

12-20 1969
PONTIAC SERVICE MANUAL
A A * *
-
-
__---
-
,/- --\
7.
V - 8 ENGINE
6 CYL. WlTH STD. BATTERY
B
A = d
$ON1 OF CA
VlEW A
000000
FRONT OF CAR
a '
INSTALLATION
VlEW B
6 CYL. WlTH HEAVY DUTY BATTERY
Fig. 12-19 Tempest and Grand Prix Battery,Cable
Routing
FUSE BLOCK AND BULKHEAD CONNECTOR
3. Remove remaining in-car wire connectors and note
The fuse block and bulkhead connector are joined by
position for reinstallation.
two screws which retain the assembly to the lower left
hand dash area. A circuit passing through a given
NOT.: Chassis wiring schematics will aid in ident1Bing
terminal may be identified by using the embossed
wires-
letters on the bulkhead connector. For example, Fig.
12-23 bulkhead connector cavity "DSU is the circuit to
4. TO replace, revem removal procedure.
the horn relay operating coil circuit
ENGINE WIRE HARNESS
ALL-REMOVE AND REPLACE
1. Remove bolt holding fro111 e11d and engine harness
ALL-REMOVE AND REPLACE
to fuse block. Separate harnesses.
-
Engine
wire
harness routing and connection may be
2. Inside car, remove two screws retaining fuse block to
determined from Fig. 12-21 for 8 cylinder applications
dash. and Fig.
12-22 for 6 cylinder.