Band Apply Pin Selection - Pontiac Grand Prix Service Manual

7E-12
1969 PONTIAC SERVICE MANUAL
Fig. 7E-16 Removing Strainer and Intake Pipe
Assembly
3. Remove rear servo accumulator spring.
4. Make band apply pin selection check to determine
possible cause of malfunction (Fig. 7E-2 1).
BAND APPLY PIN SELECTION
a. Attach Band Apply Pin and Fixture J 21370-5 and J
21370-6 to transmission case with attaching screws.
b. Apply 25 ft. Ib. torque and select proper pin to be
used during assembly of transmission.
There are three selective pins identified as follows:
a. If both steps of J 21370-5 are below the gage
surface, the long pin, identified by 3 rings, should be
used.
DETENT ROLLER A N D
Fig. 7E-17 Removing Detent Roller and Spring
Assembly
Fig. 7E-18 Removing Control Valve Assembly and
Governor Pipes from Case
SERVO
I
I
TTACHING SCREWS
Fig. 7E-19 Removing Rear Servo Cover Attaching
Screws
Fig. 7E-20 Removing Rear Servo