Power Servo Remove And Replace - Pontiac Grand Prix Service Manual

12-34
1969
PONTIAC SERVICE MANUAL
servos and
a
vacuum harness integrated with the front 3. Remove screws retaining vacuum actuator to
end harness. The doors are equipped with an over- bracket.
center spring and can be opened in case of vacuum
failure.
4. Remove "E" clips retaining actuator to pivot rod,
POWER SERVO REMOVE AND REPLACE
Fig. 12-40.
1. Remove parking lamps and valence panel.
5. To replace, reverse removal procedure.
2. Remove vacuum hoses to servo and servo cover.
6. Use Fig. 12-4 1 for connection of vacuum hoses.
PRINTED
CIRCUIT CONNECTOR
OCK POWER LEAD
RADIO FEED & LA
CIGAR LIOHTER TURN SIGNAL
BACK UP LAMP SWITCH
(MANUAL TRANS.)
H START SWITCH
'
Fig. 12-36 Typical Firebird, Grand Prix and Tempest
Instrument Panel Harness Installation