Direct Clutch And Intermediate Sprag; Disassembly Of Direct Clutch And Intermediate Sprag; Installing Forward Clutch Housing To Direct Clutch Hub Snap Ring; Removing Intermediate Clutch Retainer Snap Ring - Pontiac Grand Prix Service Manual

73-34 l9@ PONTIAC SERVICE MANUAL
Fig.
7E-91
Installing Forward Clutch Housing to
Direct Clutch Hub Snap Ring
12. Place forward clutch housing on pump delivery
sleeve and air check clutch operation (Fig. 7E-92).
DIRECT CLUTCH AND INTERMEDIATE
SPRAG
DISASSEMBLY OF DIRECT CLUTCH AND
INTERMEDIATE SPRAG
CLUTCH
Fig.
7E-93
Removing Intermediate Clutch Retainer
Snap Ring
2. Remove clutch outer race, bushings and sprag
assembly.
3. Turn unit over and remove backing plate to direct
clutch housing snap ring (Fig. 7E-94).
4. Remove direct clutch backing plate, five (5)
composition and five (5) steel clutch plates.
5. Usine Clutch Comvressor Tools J 4670. J 6129 and J
8765, &mpress sprink retainer and remove snap ring
(Fig. 7E-95).
1. Remove intermediate clutch retainer snap ring and
6. Remove retainer and sixteen (16) piston release
retainer (Fig. 7E-93).
Fig.
7E-92
Air Checking Forward Clutch
1
DIRECT CLUTCH
HOUSING
Fig.
7E-94
Removing Direct Clutch Backing Plate
Snap Ring