Disassembly Of Gear Unit; Removing Selective Washer; Removing Rear Band; Removing Center Support Assembly - Pontiac Grand Prix Service Manual

TURBO HYDRA-MATIC-M-40
7E-19
DISASSEMBLY OF GEAR UNIT
1. Remove center support assembly (Fig. 7E-49).
2. Remove center support to reaction carrier thrust
washer (Fig. 7E-50).
3. Remove center support to sun gear races and thrust
bearing.
NOTE: One race may have been removed with center
support.
4.
Remove reaction carrier and roller clutch assembly
(Fig. 7E-5 1).
5. Remove front internal gear ring from output carrier
assembly.
6. Remove sun gear (Fig. 7E-52).
7. Remove reaction carrier to output carrier thrust
washer.
8. Turn carrier assembly over.
Fig. 7E-46 Removing Center Support and Gear Unit
from Case
9. Remove output shaft to output carrier snap ring
Fig. 7E-47 Removing Selective Washer
(Fi
10.
1 1 .
-
g. 7E-53).
4
Remove output shaft.
If removal and installation or replacement of the
Fig. 7E-48 Removing Rear Band
Fig. 7E-49 Removing Center Support Assembly