Fuel Tank Gage Unit - Pontiac Grand Prix Service Manual

8-2
1969 PONTIAC SERVICE MANUAL
FRONT VENT HOSE TEMPEST AND GRAND PRlX ONLY
B
REAR STRAP MOUNT
-'--
VlEW B
VlEW C
ORAND PRIX'AND
FRONT STRAP MOUNT TEMPEST FUEL GAGE PONTIAC FUEL GAGE
NOTE PIPES MUST ENTER HOSES 13/16 MIM
Fig. 8-2 Installation of Fuel Tank
-
except Firebird
7. Remove nut holding lower tank support strap to octually inoperative
hook bolt and remove tank.
INSTALL
1. Install tank by reversing above steps.
2. Tighten lower support strap nut to 9 lb. ft. torque on
Pontiac and 8 lb. ft. torque on Tempest. Tighten front
support strap nut on Pontiac to 9 Ib. ft. torque and bolt
on Tempest to 8 lb. ft. torque. Tighten bame to wheel
well screws to 17 lb. in. torque on Pontiac and 25 lb.
in. torque on Tempest.
1. Remove tank
(see
FUEL TANK
-
EXCEPT
STATION WAGON
-
REMOVE).
2.
Clean away any dirt that has collected around gage
unit and terminal so it will not enter tank when gage
unit is removed (Fig. 8-1 1).
3.
Remove tank gage unit by using tool J
23346
on all
models except Pontiac (Fig. 8-4). Remove six attaching
hex head screws on Pontiac.
FUEL TANK GAGE UNIT (EXCEPT STATION
INSTALL
WAGON)
NOTE: Befie the new unit is installed in the tank, the
NOTE: Bcfore removing tank gage unit, bt sun it is
s w
bt
ckkedfor@e&m ofmovemnt by