Installing Roller Clutch; Installing Center Support T O Reaction Carrier Thrust Washer; Installing Case T O Output Shaft Thrust Washer - Pontiac Grand Prix Service Manual

Table of Contents

PONTIAC SERVICB MANUAL

Fig. 7E-145 lnstalling Roller Clutch

Fig. 7E-146 lnstalling Center Support t o Reaction

Carrier Thrust Washer

CENTER SUPPORT

I O N CARRIER

Fig. 7E-147 lnstalling Center Support into Reaction

Carrier and Roller Clutch

THRUST WASHER

Fig. 7E-148 lnstalling Case t o Output Shaft Thrust

3. Install new cup plug, using a

dia. rod, and

drive into transmission case until parking pawl shaft

bottoms on case rib (Fig. 7E-15 1).

4. Install parking pawl return spring, square end

hooked on pawl and other end on case (Fig. 7E-152).

5. Install parking brake bracket guides over parking

pawl, using two attaching bolts. Torque to 18 lb. ft.

Fig. 76-149 lnstalling Parking Pawl and Shaft with

Show Quick Links

Table of Contents