Exploded View Of Rear Unit; Installing Rear Internal Gear To Main Shaft Snap Ring; Installing Rear Internal Gear To Sun Gear Bearing And Races - Pontiac Grand Prix Service Manual

TURBO HYDRA-MATIC-M-40 73-47
OUTPUT FLANGED SNAP
M A I N SHAFT
I.D. FLANGE SUN GEAR
RACE
Fig. 7E-136 Exploded View of Rear Unit
c. Place small race against bearing, with inner flange
facing into bearing or down.
4. Install output carrier over mainshaft so that pinions
mesh with rear internal gear.
5. Place above portion of build-up through hole in
bench so that mainshaft hangs downward.
6. Install rear internal gear to output shaft thrust races
.
FLANGED RACE
Fig. 7E-137 Installing Rear Internal Gear to Main
Fig. 7E-138 Installing Rear Internal Gear to Sun Gear
Shaft Snap Ring
Bearing and Races