Cold Air Distribution: Center Air Outlet; And Side Outlet Ducts; Tempest Control Panel Details; Pontiac Control Panel Detaik - Pontiac Grand Prix Service Manual

CUSTOM AIR CONDITIONING
1A-39
SWITCH WATER CONTROL
VALVE
b
Fig. 1A-56 Pontiac Control Panel Detaik
COLD AIR DISTRIBUTION: CENTER AIR removed by inserting a thin blade screwdriver approxi-
OUTLET; AND SIDE OUTLET DUCTS
ALL
-
REMOVE AND REPLACE
When servicing cold air, center air outlet or side outlet
ducts refer to Figs. IA, 61, 62, 63 and 64. All duct
systems are of the same basic design. Air from the
heater case is directed to the wld air distributor duct
then to the center and side outlets. All of the five (5)
outlets have adjustable nozzles.
Right and left hand nozzles on Pontiac models may be
mately 3/4 inch between instrument pad and-upper
edge of nozzle to disengage two retaining tabs. There
~ ~
is a tab on each comer.
On Tempest models, insert screwdriver in same
position as Pontiac, however, the blade need only be
inserted a short distance since tabs are directly behind
front of nozzle.
Nozzles on Grand Prix models are retained by two
metal clips, one on each side.
The nozzle may be removed by inserting a screwdriver
into the nozzle and disengaging.
h
WATER CONTROL
MASTER
ROTARY VACUUM
Fig. 1A-57 Tempest Control Panel Details