Installing Extension Housing Bushing; Exploded View Of Transmission Side Cover; Removing Front Bearing; Removing Reverse Idler Gear Snap Ring - Pontiac Grand Prix Service Manual

Table of Contents

Fig. 78-8 Installing Extension Housing Bushing

CAUTION: Do not allow bearings to spin; turn them

slowly by hand. Spinning bearings will damage race and

balls. Make certain bearings are clean, then lubricate

with light engine oil and check them for roughness by

slowly turning race by hand.

C A M D E T E N T P I N

S H I F T E R S H A F T S

X ~ D E T E N T CAMS

D E T E N T C A M S P R I N G

Fig. 78-10 Removing Front Bearing

3. Check for cracks in blocking rings.

4. Wash transmission case thoroughly inside and

outside with suitable cleaning solvent; then inspect

case for cracks.

a. Check front and rear case faces for burrs and, if

present, remove with a fine mill file.

b. Check and clean magnet in bottom of transmission

All main drive gear and countergear bearing rollers

should be inspected closely and replaced if they show

Fig. 78-9 Exploded View of Transmission Side Cover

Fig. 78.11 Removing Reverse Idler Gear Snap Ring

Show Quick Links

Table of Contents