Compressing Intermediate Clutch Accumulator Piston Cover; Removing Accumulator Piston Assembly; Removing Accumulator Cover And Spring - Pontiac Grand Prix Service Manual

7G-18 1969 PONTIAC SERVICE MANUAL
Fig. 76-38 Compressing Intermediate Clutch
~
Accumulator Piston Cover
I'XSPECTION
1. Wash all parts in cleaning solvent, air dry and blow
out all passages.
2. Inspect governor sleeve for nicks, burrs, scoring or
galling.
3. Check governor sleeve for free operation in bore of
transmission case.
INTERMEDIATE CLUTCH
ACCUMULATOR PISTO
Fig. 7G-40 Removing Accumulator Piston Assembly
6. Inspect governor weights for free operation in their
retainers.
7. Check governor weight springs for distortion or
damage.
8. Check governor driven gear for looseness of
governor sleeve, for nicks, burrs or damage. If
replacement is necessary, follow replacement below.
GOVERNOR DRIVEN GEAR REPLACEMENT
To facilitate governor repair in the field, a governor
driven gear and weight pin are available for service
use. The service package consists of a driven gear,
governor weight retaining plns (2) and a governor gear
retaining split pin. Replacement of gear must be
performed with care in the following manner:
4. Inspect governor valve for nicks, burrs, scoring or
galling.
5. Inspect governor valve for free operation in bore of
governor sleeve.
1. Drive out governor gear retaining split pin, using a
small punch.
Fig. 76-39 Removing Accumulator Cover and Spring
Fig. 7G-41 Installing Governor Driven Gear