Installing Pump Shaft; Thrust Plate Installed; Installing Rotor; Installing Pump Vanes - Pontiac Grand Prix Service Manual

9-50 1569
PONTIAC SERVICE MANUAL
Fig. 9-91 Installing Pump Shaft
Fig. 9-92 Thrust Plate Installed
Fig. 9-94 lnstalling Pump Ring
#
7. Lubricate outside diameter and chamber of pressure
plate with petroleum jelly to insure against damaging
O-ring and install on dowel pins with ported face
toward pump ring. Applying pressure to outer edge
only, seat pressure plate. Never press or hammer on
the center of the pressure plate as this will cause
Fig: 9-93 Installing Rotor
Fig. 9-95 Installing Pump Vanes