Pressure Plate And Rotor Ring Removed; Removing Pump Shaft; Exploded View Of Power Stciering Pump - Pontiac Grand Prix Service Manual

STEERING 9-49
Fig. 9-88 Pressure Plate and Rotor Ring Removed
Fig. 9-89 Removing Pump Shaft
2. Install thrust plate on dowel pins with ported face to
rear of pump housing (Fig.
9-92).
4. Using suitable tool, install new shaft retainer ring.
3. Install rotor (must be free on splines) on pump shaft
5.
Install pump ring on dowel pins with rotation arrow
at splined end.
facing to rear of pump housing (Fig.
9-94).
NOTE: Assemble rotor with flat side toward rear of
6. Install vanes in rotor slots with radius edge towards
pump (Fig. 9-93). outside (Figs. 9-95 and 9-96).
1.
Union
2.
Seal
3.
Mounting 00th
4.
Reservoir
5.
Dip Stick and Cover
6.
End Plate Retaining
Ring
7.
End Plate
8.
Spring
9.
Pressure Plate
10.
Pump Ring
11.
Vanes
12.
C-Washer
13.
Rotor
.
14.
Thrust Plate
.
15.
Dowel
Pins
16,
End Plate 0-Ring
17.
Pressure Plate 0-Ring
18,
Mounting Bolt
0-Ring Seab
19.
Flow Control Valve
20.
Flow Control Valve
Spring
21.
Flow Control Valve
0-Ring
Swl
22.
Pump Housing
23.
Reservoir 0-Ring
Seal
24.
Shaft Seal
25.
Drive Shaft
Fig. 9-90 Exploded View of Power Stciering Pump