Remove And Replace Reservoir; Remove And Replace Control Valve And End Plate - Pontiac TRANS AM 1977 Service Manual

POWER STEERING GEAR AND P U M P 3B3-33
DISASSEMBLY
1 .
REMOVE FILLER CAP AND D R A I N
O I L FROM RESERVOIR BEFORE
REMOV l NG PARTS. THEN REMOVE
PARTS AS SHOWN.
I F DEFORMED OR DISLODGED.
ASSEMBLY
1 . INSTALL PARTS AS SHOWN.
USE NEW "0" RINGS AND
SEALS. LUBRICATE ALL SEALS
W l T H POWER STEERING FLUID
BEFOUL INSTALLATION.
Fig. 3B3-65 Remove and Replace Reservoir
DISASSEMBLY ASSEMBLY
1 . REFER TO VIEW A FOR REMOVING
1 . INSTALL END PLATE (LUBRICATE
RETAINING RING.
WITH POWER STEERING FLUID)
2. REMOVE PARTS AS SHOWN.
AND RETAINING RING AS SHOWN
I N VIEW 0.
2. INSTALL PARTS AS SHOWN.
,
OF DRIVE SHAFT. IF I T I S CORRODED. CLEAN WlTH
CROCUS CLOTH BEFORE REMOVING. THlS WILL PREVENT
DAMAGE TO THE SHAFT BUSHING WHICH M l G M REQUlRt
3957
Fig. 383-66 Remove and Replace Control Valve and End
Plate