Typical Examples Of Dns - Planet WGSW-52040 Configuration Manual

48-port 10/100/1000base-t + 4-port 100/1000x sfp managed switch
Hide thumbs Also See for WGSW-52040:
Table of Contents

Advertisement

show dns name-server
show dns domain-list
show dns hosts
show dns config
show dns client
debug dns {all | packet [send | recv] |
events | relay}
no debug dns {all | packet [send | recv]
| events | relay}

65.3 Typical Examples of DNS

ip domain-lookup
dns-server 219.240.250.101
dns-server 2001::1
SWITCH
As shown in fig, the switch connected to DNS server through network, if the switch want to visit sina Website,
it needn't to know the IPv4/IPv6 address of sina Website, only need is to record the domain name of sina
Website is www.sina.com.cn. The DNS server can resolute out the IPv4/IPv6 address of this domain name
and send to switch, then the switch can visit sina Website correctly. The switch is configured as DNS client,
basic configurations are as below: first to enable DNS dynamic domain name resolution function on switch,
and configure DNS server address, then with some kinds of tools such as PING, the switch can get
corresponding IPv4/IPv6 address with dynamic domain name resolution function.
INTERNET
Figure 65-1: DNS CLIENT typical environment
65-63
To show the configured DNS server
information.
To show the configured DNS domain name
suffix information.
To show the dynamic domain name
information of resolved by switch.
Display the configured global DNS
information on the switch.
Display the DNS Client information
maintained by the switch.
To enable/disable DEBUG of DNS function.
DNS SERVER
IP: 219.240.250.101
IPv6: 2001::1

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents