Ipv6 Radiusexample - Planet WGSW-52040 Configuration Manual

RADIUS authentication server without Ethernet1/2; IP address of the server is 10.1.1.3 and
the authentication port is defaulted at 1812, accounting port is defaulted at 1813.
Configure steps as below:
Switch(config)#interface vlan 1
Switch(Config-if-vlan1)#ip address 10.1.1.2 255.255.255.0
Switch(Config-if-vlan1)#exit
Switch(config)#radius-server authentication host 10.1.1.3
Switch(config)#radius-server accounting host 10.1.1.3
Switch(config)#radius-server key test
Switch(config)#aaa enable
Switch(config)#aaa-accounting enable

47.3.2 IPv6 RadiusExample

Figure 47-3: The Topology of IPv6 Radius configuration
A computer connects to a switch, of which the IP address is 2004:1:2:3::2 and connected with
a RADIUS authentication server without Ethernet1/2; IP address of the server is 2004:1:2:3::3
and the authentication port is defaulted at 1812, accounting port is defaulted at 1813.
Configure steps as below:
Switch(config)#interface vlan 1
Switch(Config-if-vlan1)#ipv6 address 2004:1:2:3::2/64
Switch(Config-if-vlan1)#exit
2004:1:2:3::2
2004:1:2:3::1 Radius Server
47-179
2004:1:2:3::3