Related Manuals for Planet WGSW-5242
Summary of Contents for Planet WGSW-5242
- Page 1 48-Port 10/100Mbps + 4 Gigabit TP / 2 SFP Managed Switch WGSW-5242 Quick Installation Guide...
-
Page 2: Table Of Contents
Table of Contents 1. Package Content ..................3 2. Requirements ....................4 3. Terminal Setup .................... 5 4. Logon to the Console ................... 6 5. Configure IP Address ................... 7 6. Start Web Management ................9 Customer Support ..................12... -
Page 3: Package Content
1. Package Content Thank you for purchasing PLANET Layer 2 Managed Switch, WGSW-5242. Terms of “Managed Switch” in following section of this quick installation guide means the WGSW-5242. Open the box of the Managed Switch and carefully unpack it. The box should... -
Page 4: Requirements
2. Requirements Workstations of subscribers running Windows 2000/XP/Vista/7, MAC OS9 or later, Linux, UNIX or other platform compatible with TCP/IP protocols. Workstation installed with Ethernet NIC (Network Card) Serial Port connect (Terminal) Above PC with COM Port (DB-9) Ethernet Port connect Network cables - Use standard network (UTP) cables with RJ45 connectors. -
Page 5: Terminal Setup
3. Terminal Setup To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to serial (console) port of the WGSW Managed Switch. The console port of the Managed Switch is DCE already, so that you can connect the console port directly through PC without the need of Null Modem. -
Page 6: Logon To The Console
4. Logon to the Console Once the terminal has connected to the device, power on the WGSW Managed Switch, the terminal will display that it is running testing procedures. Then, the following message asks the login user name and password. The factory default user name and password as following and the login screen in Figure 4-1 appears. -
Page 7: Configure Ip Address
5. Configure IP Address The WGSW Managed Switch is shipped with default IP address as following. IP Address: 192.168.0.100 Subnet Mask: 255.255.255.0 To check the current IP address or modify a new IP address for the Managed Switch, please use the procedures as follow: ... - Page 8 The previous command would apply the follow settings for the Managed Switch. IP: 192.168.1.100 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 Figure 5-2: Set IP Address Screen 5. Repeat Step 1 to check if the IP address is changed. 6. On “Switch#” prompt, type “Save” to save the current configuration. If the IP is successfully configured, the Managed Switch will apply the new IP address setting immediately.
-
Page 9: Start Web Management
6. Start Web Management The following shows how to startup the Web Management of the WGSW Managed Switch. Note the Managed Switch is configured through an Ethernet connection, please make sure the manager PC must be set on the same IP subnet address. For example, the default IP address of the WGSW Managed Switch is 192.168.0.100, then the manager PC should be set at 192.168.0.x (where x is a number between 1 and 254, except 100), and the default subnet mask... - Page 10 Login the Managed Switch 1. Use Internet Explorer above browser, enter address http://192.168.0.100 (the factory-default IP address or that you have just changed in console) to access the Web interface. 2. When the following dialog box appears, please enter the default username “admin”...
-
Page 11: While Ip Address Be Changed Or Forgotten Admin Password
4. The Switch Menu on the left of the Web page let you access all the commands and statistics that Switch provides. Figure 6-4: Switch Menu If you do not familiar with Switch functions or the related param- eter, press “Help” button anytime in left menu of the Web page to get the help description. -
Page 12: Customer Support
Customer Support Thank you for purchase PLANET products. You can browse our online FAQ resource at the PLANET website first to check if it could solve you issue. If you need more support information, please contact PLANET switch support team.