Table of Contents
Advertisement
Port mode
ipv6 dhcp snooping remote-id <remote-id>
no ipv6 dhcp snooping remote-id
ipv6 dhcp snooping subscriber-id <subscriber-id>
no ipv6 dhcp snooping subscriber-id
2. DHCPv6 relay option basic functions configuration
Command
Global mode
ipv6 dhcp relay remote-id option
no ipv6 dhcp relay remote-id option
original default configuration,
i.e. vlan name together with
port name.
This command is used to set
the form of adding option 37 in
received DHCPv6 request
packets, of which <remote-id>
is the content of remote-id in
user-defined option 37 and it is
a string with a length of less
than 128. The no operation
restores remote-id in option 37
to enterprise-number together
with vlan MAC address.
This command is used to set
the form of adding option 38 in
received DHCPv6 request
packets, of which
<subscriber-id> is the content
of subscriber-id in user-defined
option 38 and it is a string with
a length of less than 128. The
no operation restores
subscriber-id in option 38 to
vlan name together with port
name such as
"Vlan2+Ethernet1/2".
Description
This command enables the
switch relay to support option
37 and the no form of this
35-66
Advertisement
Table of Contents
Troubleshooting
