Am Function Troubleshooting - Planet WGSW-52040 Configuration Manual

48-port 10/100/1000base-t + 4-port 100/1000x sfp managed switch

Hide thumbs Also See for WGSW-52040:

Table of Contents

44.4 AM Function Troubleshooting

AM function is disabled by default, and after it is enabled, relative configuration of AM can be

Users can view the current AM configuration with "show am" command, such as whether the

AM is enabled or not, and AM information on each interface, they can also use "show am

[interface <interface-name>]" command to check the AM configuration information on a

specific interface.

If any operational error happens, the system will display detailed corresponding prompt.